Checking tyre pressures and wear – the right way

It is so important to correct maintain and look after your tyres as they are a massive part of the safety of your vehicle. They not only contribute hugely to the safety of the vehicle but also to the fuel consumption and handling of the vehicle.

It is vital to check your tyre pressures and to also check for wear or damage to your tyres every couple of weeks at least and when going on a long journey. Checking tyres pressures can often be done at most petrol stations but these have sometimes been shown to be inaccurate and if you are unsure as to whether your tyre is inflated properly then you may not wish to drive on it. Ideally you should use a home tyre pressure gauge that can be picked up from many car parts shops such as Halfords for as little as £10. You simply unscrew the dust caps, push the tyre pressure gauge on to the value and look at the reading. You will need to know what the correct pressures should be for your car which is normal stated in the handbook or sometimes inside the driver’s door pillar.

When checking pressures it is also advisable to check for damage to the tyre, this may be noticeable cuts or tears, bulges or wear. If they tyre is damaged then you need to take it to a tyre repair shop to see if it needs repairing or replacing, if the tyre is showing signs of wear then you can do a simply check with tyre depth gauge to see how low the tyre is. Anything under 3mm is advised to be change although the legal limit is 1.6mm.